ariel_os_stm32::peripherals

Struct USART1

pub struct USART1 { /* private fields */ }

Expand description

USART1 peripheral

Implementations§

impl USART1

pub unsafe fn steal() -> USART1

Unsafely create an instance of this peripheral out of thin air.

§Safety

You must ensure that you’re only using one instance of this type at a time.

Trait Implementations§

impl CkPin<USART1> for PA8

fn af_num(&self) -> u8

Get the AF number needed to use this pin as CkPin

impl CkPin<USART1> for PB5

fn af_num(&self) -> u8

Get the AF number needed to use this pin as CkPin

impl CtsPin<USART1> for PA11

fn af_num(&self) -> u8

Get the AF number needed to use this pin as CtsPin

impl CtsPin<USART1> for PB4

fn af_num(&self) -> u8

Get the AF number needed to use this pin as CtsPin

impl DePin<USART1> for PA12

fn af_num(&self) -> u8

Get the AF number needed to use this pin as DePin

impl DePin<USART1> for PB3

fn af_num(&self) -> u8

Get the AF number needed to use this pin as DePin

impl Instance for USART1

type Interrupt = USART1

Interrupt for this peripheral.

impl Peripheral for USART1

type P = USART1

Peripheral singleton type

unsafe fn clone_unchecked(&self) -> <USART1 as Peripheral>::P

Unsafely clone (duplicate) a peripheral singleton. Read more

fn into_ref<'a>(self) -> PeripheralRef<'a, Self::P>
where Self: 'a,

Convert a value into a PeripheralRef. Read more

impl RtsPin<USART1> for PA12

fn af_num(&self) -> u8

Get the AF number needed to use this pin as RtsPin

impl RtsPin<USART1> for PB3

fn af_num(&self) -> u8

Get the AF number needed to use this pin as RtsPin

impl RxDma<USART1> for DMA1_CH1

fn request(&self) -> u8

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RxDma<USART1> for DMA1_CH2

fn request(&self) -> u8

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RxDma<USART1> for DMA1_CH3

fn request(&self) -> u8

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RxDma<USART1> for DMA1_CH4

fn request(&self) -> u8

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RxDma<USART1> for DMA1_CH5

fn request(&self) -> u8

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RxDma<USART1> for DMA1_CH6

fn request(&self) -> u8

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RxDma<USART1> for DMA1_CH7

fn request(&self) -> u8

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RxDma<USART1> for DMA2_CH1

fn request(&self) -> u8

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RxDma<USART1> for DMA2_CH2

fn request(&self) -> u8

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RxDma<USART1> for DMA2_CH3

fn request(&self) -> u8

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RxDma<USART1> for DMA2_CH4

fn request(&self) -> u8

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RxDma<USART1> for DMA2_CH5

fn request(&self) -> u8

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RxDma<USART1> for DMA2_CH6

fn request(&self) -> u8

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RxDma<USART1> for DMA2_CH7

fn request(&self) -> u8

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RxPin<USART1> for PA10

fn af_num(&self) -> u8

Get the AF number needed to use this pin as RxPin

impl RxPin<USART1> for PB7

fn af_num(&self) -> u8

Get the AF number needed to use this pin as RxPin

impl TxDma<USART1> for DMA1_CH1

fn request(&self) -> u8

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl TxDma<USART1> for DMA1_CH2

fn request(&self) -> u8

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl TxDma<USART1> for DMA1_CH3

fn request(&self) -> u8

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl TxDma<USART1> for DMA1_CH4

fn request(&self) -> u8

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl TxDma<USART1> for DMA1_CH5

fn request(&self) -> u8

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl TxDma<USART1> for DMA1_CH6

fn request(&self) -> u8

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl TxDma<USART1> for DMA1_CH7

fn request(&self) -> u8

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl TxDma<USART1> for DMA2_CH1

fn request(&self) -> u8

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl TxDma<USART1> for DMA2_CH2

fn request(&self) -> u8

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl TxDma<USART1> for DMA2_CH3

fn request(&self) -> u8

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl TxDma<USART1> for DMA2_CH4

fn request(&self) -> u8

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl TxDma<USART1> for DMA2_CH5

fn request(&self) -> u8

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl TxDma<USART1> for DMA2_CH6

fn request(&self) -> u8

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl TxDma<USART1> for DMA2_CH7

fn request(&self) -> u8

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl TxPin<USART1> for PA9

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TxPin

impl TxPin<USART1> for PB6

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TxPin

impl RccPeripheral for USART1

Auto Trait Implementations§

impl Freeze for USART1

impl RefUnwindSafe for USART1

impl Send for USART1

impl Sync for USART1

impl Unpin for USART1

impl UnwindSafe for USART1

Blanket Implementations§

impl<T> Any for T
where T: 'static + ?Sized,

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

impl<T> Borrow<T> for T
where T: ?Sized,

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

impl<T> BorrowMut<T> for T
where T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

impl<T> From<T> for T

fn from(t: T) -> T

Returns the argument unchanged.

impl<T, W> HasTypeWitness<W> for T
where W: MakeTypeWitness<Arg = T>, T: ?Sized,

const WITNESS: W = W::MAKE

A constant of the type witness

impl<T> Identity for T
where T: ?Sized,

const TYPE_EQ: TypeEq<T, <T as Identity>::Type> = TypeEq::NEW

Proof that Self is the same type as Self::Type, provides methods for casting between Self and Self::Type.

type Type = T

The same type as Self, used to emulate type equality bounds (T == U) with associated type equality constraints (T: Identity<Type = U>).

impl<T, U> Into<U> for T
where U: From<T>,

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

impl<T, U> TryFrom<U> for T
where U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.