ariel_os_stm32::peripherals

Struct SPI1

pub struct SPI1 { /* private fields */ }
Expand description

SPI1 peripheral

Implementations§

§

impl SPI1

pub unsafe fn steal() -> SPI1

Unsafely create an instance of this peripheral out of thin air.

§Safety

You must ensure that you’re only using one instance of this type at a time.

Trait Implementations§

§

impl CsPin<SPI1> for PA15

§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as CsPin
§

impl CsPin<SPI1> for PA4

§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as CsPin
§

impl CsPin<SPI1> for PB2

§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as CsPin
§

impl MisoPin<SPI1> for PA11

§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as MisoPin
§

impl MisoPin<SPI1> for PA6

§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as MisoPin
§

impl MisoPin<SPI1> for PB4

§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as MisoPin
§

impl MosiPin<SPI1> for PA12

§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as MosiPin
§

impl MosiPin<SPI1> for PA7

§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as MosiPin
§

impl MosiPin<SPI1> for PB5

§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as MosiPin
§

impl Peripheral for SPI1

§

type P = SPI1

Peripheral singleton type
§

unsafe fn clone_unchecked(&self) -> <SPI1 as Peripheral>::P

Unsafely clone (duplicate) a peripheral singleton. Read more
§

fn into_ref<'a>(self) -> PeripheralRef<'a, Self::P>
where Self: 'a,

Convert a value into a PeripheralRef. Read more
§

impl RxDma<SPI1> for DMA1_CH1

§

fn request(&self) -> u8

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
§

impl RxDma<SPI1> for DMA1_CH2

§

fn request(&self) -> u8

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
§

impl RxDma<SPI1> for DMA1_CH3

§

fn request(&self) -> u8

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
§

impl RxDma<SPI1> for DMA1_CH4

§

fn request(&self) -> u8

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
§

impl RxDma<SPI1> for DMA1_CH5

§

fn request(&self) -> u8

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
§

impl RxDma<SPI1> for DMA1_CH6

§

fn request(&self) -> u8

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
§

impl RxDma<SPI1> for DMA1_CH7

§

fn request(&self) -> u8

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
§

impl RxDma<SPI1> for DMA2_CH1

§

fn request(&self) -> u8

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
§

impl RxDma<SPI1> for DMA2_CH2

§

fn request(&self) -> u8

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
§

impl RxDma<SPI1> for DMA2_CH3

§

fn request(&self) -> u8

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
§

impl RxDma<SPI1> for DMA2_CH4

§

fn request(&self) -> u8

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
§

impl RxDma<SPI1> for DMA2_CH5

§

fn request(&self) -> u8

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
§

impl RxDma<SPI1> for DMA2_CH6

§

fn request(&self) -> u8

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
§

impl RxDma<SPI1> for DMA2_CH7

§

fn request(&self) -> u8

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
§

impl SckPin<SPI1> for PA1

§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as SckPin
§

impl SckPin<SPI1> for PA5

§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as SckPin
§

impl SckPin<SPI1> for PB3

§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as SckPin
§

impl TxDma<SPI1> for DMA1_CH1

§

fn request(&self) -> u8

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
§

impl TxDma<SPI1> for DMA1_CH2

§

fn request(&self) -> u8

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
§

impl TxDma<SPI1> for DMA1_CH3

§

fn request(&self) -> u8

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
§

impl TxDma<SPI1> for DMA1_CH4

§

fn request(&self) -> u8

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
§

impl TxDma<SPI1> for DMA1_CH5

§

fn request(&self) -> u8

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
§

impl TxDma<SPI1> for DMA1_CH6

§

fn request(&self) -> u8

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
§

impl TxDma<SPI1> for DMA1_CH7

§

fn request(&self) -> u8

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
§

impl TxDma<SPI1> for DMA2_CH1

§

fn request(&self) -> u8

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
§

impl TxDma<SPI1> for DMA2_CH2

§

fn request(&self) -> u8

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
§

impl TxDma<SPI1> for DMA2_CH3

§

fn request(&self) -> u8

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
§

impl TxDma<SPI1> for DMA2_CH4

§

fn request(&self) -> u8

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
§

impl TxDma<SPI1> for DMA2_CH5

§

fn request(&self) -> u8

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
§

impl TxDma<SPI1> for DMA2_CH6

§

fn request(&self) -> u8

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
§

impl TxDma<SPI1> for DMA2_CH7

§

fn request(&self) -> u8

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
§

impl Instance for SPI1

§

impl RccPeripheral for SPI1

Auto Trait Implementations§

§

impl Freeze for SPI1

§

impl RefUnwindSafe for SPI1

§

impl Send for SPI1

§

impl Sync for SPI1

§

impl Unpin for SPI1

§

impl UnwindSafe for SPI1

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

§

impl<T, W> HasTypeWitness<W> for T
where W: MakeTypeWitness<Arg = T>, T: ?Sized,

§

const WITNESS: W = W::MAKE

A constant of the type witness
§

impl<T> Identity for T
where T: ?Sized,

§

const TYPE_EQ: TypeEq<T, <T as Identity>::Type> = TypeEq::NEW

Proof that Self is the same type as Self::Type, provides methods for casting between Self and Self::Type.
§

type Type = T

The same type as Self, used to emulate type equality bounds (T == U) with associated type equality constraints (T: Identity<Type = U>).
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.